|
| |
 |
| |
When the desired level of effluent has been applied to the paddock turn the 90mm Adaptor Set Isolating Valve to off.
Proceed to turn all the Pod Sprinkler Lines Valves off at the Pod Hydrants.
Disconnect the Sub Main from the 90mm Adaptor Set and each of the Pod Sprinkler Lines from the Pod Hydrants.
Connect the Sub Main to the ATV via the Hansen™ Tow System; proceed to drag the Sub Main to the new location.
Connect the Pod Sprinkler Lines to the ATV via the Hansen™ Tow System; proceed to drag the Pod Sprinkler Lines to the new location.
Re-connect Sub Main to Adaptor Set, re-connect Pod Sprinkler Lines to Pod Hydrants and turn on all Hydrant Valves.
Turn the Isolating Valve on and begin irrigating at the new location. |
| |
|
|
